|
Working Example:
Features:
- 1.Round type and radiate magnetic poles, suitable for clamping round type and any form of workpiece machining.
- 2.Workpieces can be touch to all poles of Magnetic Chuck, super power magnetic force as minimum of 1120Kgf (I.12tons) and maximum of 50,400Kgf (50 tons), it depends on size of workpiece and magnetic chuck. (Please refer to the spec. list)
- 3.1 ~ 10 seconds control for power ON & OFF. No electric power supply required to keep the magnetic chuck ON, cable can be taken off for turning chuck freely while machining.
- 4.Un-obstructed movement of cutters during machining, the really functions of 5 side machining on workholding.
- 5.Design of Electric-Permanent, never gets temperature to effect the accuracy of workpieces.
Unit:mm
Custom-made is available.
Applications:
- Suitables in use for combine with Vertical Lathe, CNC 5 Axis Index Device, CNC 5 Axis Machining Center etc.
- Minimum thickness of workpiece required: 10 mm
- Minimum dimension of workpiece required as:
EEPM-CIR500-Ø300mm; EEPM-CIR600-Ø360mm
EEPM-CIR800-Ø500mm; EEPM-CIR1000-Ø500mm
EEPM-CIR1250-Ø850mm; EEPM-CIR1500-Ø850mm
EEPM-CIR1600-Ø1200mm; EEPM-CIR1800-Ø1200mm
or same dimensions of any other forms of workpiece
- More functions for cooperate with induction plate, can do positioning on workholding
|
|
Option Accessories:
Induction Block
- Induction Block EEPM-CIRIB series are use for EEPM-CIR chucks, can do many more fuctions on workholding.
- Covenience and Accuracy: Induction Block are interchanging & consuming accessories, you can machining surface or forming induction blocks for the workpiece required by the machine directly, so the parallelism of induction block will always 100% match to the machine.
Working Example: ID positioning and OD machining by Induction Block
 |
T Fixed Slide Block
- T Fixed Slide Block can do base points for workpiece positioning.
- Due to the holding surface of small workpiece is not big enough, so please always use the T fixed slide Block to avoid the workpiece moving when machining.
|
Working Example: Vertical Lathe machining by Induction Block with T Fixed slide Block
 |
Spring Block, Fixed Block
- Suitable for clamping on iron cast, flexuous and thin workpieces, it will not be out of shape of the workpiece after machining.
- 3 pcs of Fixed Blocks is necessary for workpiece clamping, it could be makes a basic surface for the workpiece touch to the Spring Blocks.
- Elastic range of Spring Block: each 2.5mm for up and down.
- EEPM-SP: suitable for bigger workpiece.
EEPM-CIRSP: suitable for smaller workpiece.
|
Working Example: Vertical Lathe machining by spring Block with Fixed Block
Working Example:
|
