Magnetic Clamping Block ECB Series - Earth-Chain, Permanent Magnetic Clamping Block Factory

詢價、詢問

規格型號

數量

The all new model Magnetic Clamping Block ECB Series are a new sense of clamping way for metal working on CNC Machining Center and Milling Machine in quick clamp workpieces.
Free to set up position, numbers and distance of Magnetic Clamping Block according to the size of workpiece.
The ECB Series including changeable Induction Soft Block. It can be revised the surface to be 100% accuracy on the machine for clamp workpieces. Can be also cutting, drilling, tapping and slotting directly to the Induction Soft Block during machining workpiece. Multi-function of Induction Soft Block, the user can make it by themselves according to workpiece required.
Two machining circle for finish workpiece machining, increase a lot of machining efficiency and achieve accuracy required.

Most suitable for medium and large size of workpiece machining on milling machine and CNC machining center.
Minimum size of workpiece required as bigger than an area of two Magnetic Clamping Blocks.
The Magnetic Clamping Blocks are not suitable for small workpiece clamping.

Unit:mm

MODEL NO	HOLDING POWER	MINIMUM THICKNESS OF WORKPIECE REQUIRED	G	H	Height Total (including lnduction Block)	N.W.
ECB-210	2100kgf±5%	30	115	134	155	36kg
ECB-120	1200kgf±5%	20	92.5	108	123	18kg
ECB-075	750kgf±5%	15	85	78	90	9.5kg
ECB-050	500kgf±5%	15	61	78	78	7kg

Permanent Magnetic Clamping Block ECB Series