Previous Next
Electro-Permanent Magnetic ChuckEEPM-BF Series
Product Description

Suitable for medium and large workpiece.
(Can do 5 sides machining)

詢價、詢問

Pole 50X50 mm, Flux Line 25 mm, Magnetic Force 1250±5% kgf/4 Poles


Application

  • Suitable for medium and large workpiece machining.
  • Suitable for medium and large double column machining center.
  • Make sure the machining quality and security the workpiece dimension of length, width minimum covering required covering 20 poles and thickness must be at least 40mm.
  • More functions for cooperate with induction block and spring block.
    (See the detail of Option Accessories)
Unit:mm
MODEL NO.DIMENSION PITCH
G
POLE
P
NO. OF
POLE
TOTAL HOLDING
POWER kgf ±5%
CHUCK
N.W.
VOLTAGE
(Single Phase)
CURRENT
AMP
CONTROLLER
(included)
VOLTAGE
(Single Phase)
CURRENT
AMP
CONTROLLER
(included)
S1 M1 
EEPM-50100BF  480 990 50 30 60 40 M8  60  10 50×50 60 18750 143kg CHUCK
DC
220V

CONTROLLER
AC
220V
/
480V
31A  C2 CHUCK
DC
380V

CONTROLLER
AC
380V
/
440V
18A  C2
EEPM-6060BF  600 590 50 35 50 30 48 15000 196kg  30A  C2  12A  C2
EEPM-6080BF  600 810 55 35 60 30 64 20000 246kg  33A  C2  18A  C2
EEPM-60100BF  600 990 50 35 60 40 70 21850 191kg  25A  C4  14A  C2
EEPM-8080BF  755 810 55 42.5 60 50 80 25000 239kg  23A  C4  14A  C4
EEPM-100100BF  1000 1000 55 60 60 65 70  120 37500 469kg  33A  C4  21A  C4
EEPM-150150BF  1500 1500 75 55 100 50 300 93750 1054kg  29A  C12  15A  C12
(Customization is available.)

Option Accessories-Induction Block EEPM-IB Series
  • Specification
    Unit:mm
    MODEL NO. NO. OF
    POLE 
    HEIGHT G
    EEPM-IB225B   50 110 25 50 10
    EEPM-IB325B   50 170 25 50 10
    MODEL NO. NO. OF
    POLE 
    HEIGHT G
    EEPM-IB250B   50 110 50 50 10
    EEPM-IB350B   50 170 50 50 10
  • Features:
    • Induction Block EEPM-IB series are use with EEPM chucks, can be increased to more functions on workholding.
    • Increased using life of magnetic chuck: We suggest always use induction block to clamp workpieces, due to workpiece will not touch to the surface of chucks it can be keep chucks always be new.
    • Convenience and Accuracy: Induction Block are interchanging & consuming accessories, you can machining surface or forming induction blocks for the workpiece required by the machine directly, so the parallelism of induction block will always 100% match to the machine.
  • Working Example
  • Video
  • Other Accessories
    • proimages/products/PRODUCT-15/006.png
Products