Electro-Permanent Magnetic Chuck EEPM-D Series
Pole 70X70 mm, Flux Line 40 mm, Magnetic Force 2800±5% kgf/4 Poles
Applications
- Suitable for medium and large workpiece on heavy duty machining.
- Suitable for medium and double column machining center.
- Minimum size of workpiece required as 4 alternate magnetic square poles and above contacts is necessary for optimum clamping.
- More functions for cooperate with Induction Block and Spring Block. (See the detail of Option Accessories)
Unit:mm
(Customization is available.)
| MODEL NO. | DIMENSION | PITCH G | POLE P | NO. OF POLE | TOTAL HOLDING POWER kgf ±5% | CHUCK N.W. | VOLTAGE (Single Phase) | CURRENT AMP | CONTROLLER (included) | VOLTAGE (Single Phase) | CURRENT AMP | CONTROLLER (included) | ||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| W | L | S | S1 | M | T | H | ||||||||||||
| EEPM-3060D | 340 | 670 | 30 | 25 | 30 | M10 | 70 | 20 | 70×70 | 18 | 12600 | 126kg | CHUCK DC 220V CONTROLLER AC 220V / 480V |
24A | C2 | CHUCK DC 380V CONTROLLER AC 380V / 440V |
25A | C1H |
| EEPM-4050D | 430 | 530 | 30 | 25 | -- | 20 | 14000 | 126kg | 13A | C2 | 22A | C1H | ||||||
| EEPM-4060D | 430 | 670 | 30 | 25 | 30 | 24 | 16800 | 159kg | 24A | C2 | 29A | C1H | ||||||
| EEPM-4080D | 430 | 850 | 30 | 25 | 30 | 32 | 22400 | 202kg | 16A | C4 | 27A | C2H | ||||||
| EEPM-5060D | 520 | 670 | 30 | 25 | 30 | 30 | 21000 | 193kg | 19A | C2 | 17A | C2H | ||||||
| EEPM-5080D | 520 | 850 | 30 | 25 | 30 | 40 | 28000 | 244kg | 13A | C4 | 22A | C2H | ||||||
| EEPM-6060D | 660 | 670 | 30 | 25 | 30 | 36 | 25200 | 245kg | 15A | C4 | 25A | C2H | ||||||
| EEPM-6080D | 660 | 850 | 30 | 25 | 30 | 48 | 33600 | 310kg | 24A | C4 | 29A | C2H | ||||||
| EEPM-8080D | 840 | 850 | 30 | 25 | 30 | 64 | 44800 | 395kg | 32A | C8 | 27A | C4H | ||||||
Option Accessories-Induction Block EEPM-IBD Series
- Specification
Unit:mmMODEL NO. NO. OF
POLEW L HEIGHT P G EEPM-IB225D 2 70 160 25 70 20 EEPM-IB325D 3 70 250 25 70 20 - Features:
- Induction Block EEPM-IB series are use with EEPM chucks, can be increased to more functions on workholding.
- Increased using life of magnetic chuck: We suggest always use induction block to clamp workpieces, due to workpiece will not touch to the surface of chucks it can be keep chucks always be new.
- Convenience and Accuracy: Induction Block are interchanging & consuming accessories, you can machining surface or forming induction blocks for the workpiece required by the machine directly, so the parallelism of induction block will always 100% match to the machine.
- Working Example
- Video
- Other Accessories
