Electro-Permanent Magnetic Chuck EEPM-V Series
- Super power magnetic force 1250kgf/100cm2±5% (4 Poles)
- Control each working face for ON and OFF, so it can be load and unload the workpiece on each working face. 3~10 seconds control for power ON and OFF.
- Each EEPM-V type can be clamp multi-workpiece machining, instead of multi-pollet change investment.
- Can do 5 sides machining, un-obstructed movement of cutters during machining. One cycle to finish a workpiece, helps in achieving best machining accuracy and increases efficiency a lot.
- Suitable for CNC horizontal machining center.
- EEPM-V2 with 2 working faces suitable for bigger workpiece.
- EEPM-V4 with 4 working faces suitable for medium workpiece.
- Minimum thickness of workpiece required : 10 mm
- More functions for cooperate with lnduction Block and Spring Block. (See the detail of Option Accessories)
Unit:mm
Customization is available.
| MODEL NO. | DIMENSION | PITCH | POLE | NO. OF POLE | TOTAL HOLDING POWER kgf ±5% | CHUCK N.W. | VOLTAGE (Single Phase) | CURRENT AMP | CONTROLLER (included) | VOLTAGE (Single Phase) | CURRENT AMP | CONTROLLER (included) |
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| EEPM-500V2 | 430×500 | 10 | 50×50 | 42×2 | 13100 | 480kg | CHUCK DC 220V CONTROLLER AC 220V / 480V |
30A | C2 | CHUCK DC 380V CONTROLLER AC 380V / 440V |
14A | C2H |
| EEPM-500V4 | 450×470 | 10 | 50×50 | 36×4 | 11200 | 510kg | 20A | C2 | 13A | C1H | ||
| EEPM-800V2 | 750×760 | 10 | 50×50 | 100×2 | 31200 | 760kg | 22A | C4 | 10A | C4H | ||
| EEPM-800V4 | 750×760 | 10 | 50×50 | 100×4 | 31200 | 810kg | 22A | C4 | 10A | C4H |
