Previous Next

Electro-Permanent Lifting Magnet (Battery Type) EPLMB Series

Electro-Permanent Lifting Magnet (Battery Type) EPLMB Series
製品の説明

Suitable for large iron and steel plate lifting and moving.

お問い合わせ
<span>Electro-Permanent Lifting Magnet (Battery Type) </span><span> EPLMB Series</span>
{詢價標題}
{直接詢價} {放入詢價單} {成功加入詢價單}

Feature:

  • Battery type Permanent magnet electronic control structure design, with Neodymium (NdFeB).
    No electric power supply required to keep magnetic chuck ON and provides maximized safety in case of power failure.
  • Low-voltage safety warning system, can detect the lithium battery power through the screen at any time.
  • With explosion proof Lithium battery, the charger can be setting 110V~220V.
    EPLM (B) can be used for operating 160 cycles after the battery is fully charged.
    EPLM (D) can be used for operating 100 cycles after the battery is fully charged.
  • The magnetism is divided into 5 levels, it can be adjusted the best magnetic force level for different workpieces.
  • Modular design can be freely expanded the output port, and the number of EPLM (B) Lifters are according to the application.
  • The numbers of EPLM (B) can be operated by wireless remote control the maximum can be 10 pcs EPLM (B) Lifter. Under unobstructed environment, the wireless remote control distance can be 20 meters.
  • Customization：Replaceable induction block will be alternative option according to different workpiece sizes or shapes to meet the various applications requirements.
  • Proximity sensor device: When the hoisting and lifting is started the wireless remote control device can't carry out any operation to prevent potential risk of workpiece dropping caused by mistouch the button.


Application:

Suitable for large iron and steel plate lifting and moving.



Warning!

Do not operate at temperatures above 80℃(176 F).

    • Suitable for flat and thin workpieces above 5mm.
    • EPLM (B) can be used for operating 160 cycles after the battery is fully charged.

    Note:

    Induction block EPLM (D)-IB Series can be replaced and used for various type of workpiece such as steel plates, iron blocks, molds, cylindrical iron or irregular castings etc. for more application efficiency.



    Lifting Capacity Safety Factor Dimension Charging
    Voltage      		VoltageCurrentWeightNo. of Pole
    3000 kgf  3.3 times   L460 mm x W470 mm x H370 mm (18.1"x18.4"x23.5") DC 54.6V DC 48V 60 A 172 kg 36

    Level Force 1
    Lifting Capacity     		Level Force 2
    Lifting Capacity     		Level Force 3
    Lifting Capacity     		Level Force 4
    Lifting Capacity      		Level Force 5
    Lifting Capacity
    600 kgf
    (1320 lbf)     		 1200 kgf
    (2640 lbf)     		 1800 kgf
    (3960 lbf)    		 2400 kgf
    (5280 lbf)    		 3000 kgf
    (6600 lbf)
    • Suitable for steel plates, molds, cylindrical iron or irregular castings workpiece.
      (Special accessories are required-EPLM (D)-IB Series)
    • EPLM-D(B) can be used for operating 100 cycles after the battery is fully charged.



    Lifting Capacity Safety Factor Dimension Charging
    Voltage      		VoltageCurrentWeightNo. of Pole
    4000 kgf  3.5 times   L530 mm x W500 mm x H647 mm (20.9"x19.7"x25.4") DC 71V DC 63V 20 A 270 kg 10

    Level Force 1
    Lifting Capacity     		Level Force 2
    Lifting Capacity     		Level Force 3
    Lifting Capacity     		Level Force 4
    Lifting Capacity      		Level Force 5
    Lifting Capacity
    800 kgf
    (1760 lbf)     		 1600 kgf
    (3520 lbf)     		 2400 kgf
    (5280 lbf)    		 3200 kgf
    (7040 lbf)    		 4000 kgf
    (8800 lbf)

Induction Block: EPLM (D)-IB Series


  • Induction Block EPLM (D)-IB series could be machining according to varies workpiece shapes to increase workpiece touch surface for improving lifting capacity.
  • The EPLM-D (B) series can be used with different Induction blocks EPLM (D)-IB for the variety workpiece shapes required.
  • Induction block EPLM (D)-IB Series can be replaced and used for various type of workpiece such as steel plates, iron blocks, molds, cylindrical iron or irregular castings etc. for more application efficiency.


When lifting round steel, the maximum lifting capacity is 2,000kgf due to installation of V-shaped EPLM (D)-IB.

    • Spreader bars help keep large or irregular loads under control during transport.
    • Can be free to set up position, numbers and distance of EPLM (B) according to the dimension of workpiece and application for lifting balance, safety and convenience.
    • Operated by wireless remote control, a single operator can control multiple EPLM (B) Lifter simultaneously which can easily lift large workpieces and greatly reduce the time for personnel to operate the lifting workpiece.

    Custom-made product, please specify the workpiece dimension and weight before place order.

    • Electro-Permanent Lifting Magnet (battery type) EPLM (B)S series is Custom-Made professionally. It could be customized according to workpiece shape, size and weight, with Custom-Made structure design to meet the different application of customers' various industries.

Example

Products