Previous Next
Electro-Permanent Magnetic ChuckEEPM-B Series
Product Description

Suitable for medium & small workpiece.
(Can do 5 sides machining)

詢價、詢問

Pole 50X50 mm, Flux Line 25 mm, Magnetic Force 1250±5% kgf/4 Poles


  • 1-2 seconds control for power ON & OFF. No electric power supply required to keep magnetic chuck ON and provides maximized safety in case of power failure. Never get temperatures to affect the accuracy of workpieces.
  • With 8 Magnetic levels for different workpiece size and application to avoid sticking the iron chip.
  • Capable for 5 sides machining and un-obstructed cutter movement during machining. Allow workpiece machining finished in one cycle, while still achieving best machining accuracy and highly increased working efficiency.
  • Easy and convenient to clamp a workpiece, shortens clamping time.
  • Minimum size of workpiece required as 4 alternate magnetic square poles and above contacts is necessary for optimum clamping.
  • More functions for cooperate with Induction Block and Spring Block. (See the detail of Option Accessories)

  • Most suitable for machining on medium & small or even rough workpieces.
  • Suitable for drilling and finishing machining on small workpieces.
  • Minimum size of workpiece required as 4 alternate magnetic square poles and above contacts is necessary for optimum clamping.
  • Minimum thickness of workpiece required:10mm.
  • More functions for cooperate with Induction Block and Spring Block.
Unit:mm
MODEL NO.DIMENTION PITCH
G
POLE
P
NO. OF
POLE
TOTAL HOLDING
POWER kgf ±5%
CHUCK
N.W.
VOLTAGE
(Single Phase)
CURRENT
AMP
CONTROLLER
(included)
VOLTAGE
(Single Phase)
CURRENT
AMP
CONTROLLER
(included)
S1 
EEPM-2540B  240 430 30 25 -- M8  60 10 50×50 18 5600 50kg CHUCK
DC
220V

CONTROLLER
AC
220V
/
480V
18A  C1 CHUCK
DC
380V

CONTROLLER
AC
380V
/
440V
16A  C1
EEPM-2560B  240 590 30 25 30 24 7500 69kg  30A  C1  12A  C1
EEPM-2580B  240 810 30 25 30 33 10300 92kg  30A  C1  19A  C1
EEPM-2590B  240 870 30 25 30 36 11200 98kg  18A  C2  18A  C1
EEPM-25100B  240 990 30 25 30 42 13100 111kg  26A  C2  14A  C2
EEPM-3030B  300 310 30 25 --  16 5000 44kg  20A  C1  8A  C1
EEPM-3040B  300 430 30 25 --  24 7500 61kg  30A  C1  12A  C1
EEPM-3060B  300 590 30 25 30 32 10000 82kg  30A  C1  20A  C1
EEPM-3080B  300 810 30 25 30 44 13700 116kg  25A  C2  13A  C2
EEPM-3090B  300 870 30 25 30 48 15000 123kg  30A  C2  12A  C2
EEPM-30100B  300 990 30 25 30 56 17500 138kg  35A  C2  19A  C2
Unit:mm
MODEL NO.DIMENTION PITCH
G
POLE
P
NO. OF
POLE
TOTAL HOLDING
POWER kgf ±5%
CHUCK
N.W.
VOLTAGE
(Single Phase)
CURRENT
AMP
CONTROLLER
(included)
VOLTAGE
(Single Phase)
CURRENT
AMP
CONTROLLER
(included)
S1 
EEPM-4040B  420 430 30 25 --  M8  60 10 50×50 36 11200 84kg  CHUCK
DC
220V

CONTROLLER
AC
220V
/
480V
18A  C2  CHUCK
DC
380V

CONTROLLER
AC
380V
/
440V
18A  C1
EEPM-4050B  420 490 30 25 --  42 13100 95kg  26A  C2  14A  C2
EEPM-4060B  420 590 30 25 30 48 15000 100kg  30A  C2  12A  C2
EEPM-4080B  420 810 30 25 30 66 20600 159kg  30A  C2  19A  C2
EEPM-4090B  420 870 30 25 30 72 22500 169kg  18A  C4  18A  C2
EEPM-40100B  420 990 30 25 30 84 26200 193kg  26A  C4  12A  C4
EEPM-5060B  480 590 30 25 30 56 17500 129kg  35A  C2  19A  C2
EEPM-5080B  480 810 30 25 30 77 24000 185kg  30A  C4  13A  C4
EEPM-5090B  480 870 30 25 30 84 26200 196kg  26A  C4  14A  C4
EEPM-50100B  480 990 30 25 30 98 30600 219kg  30A  C4  12A  C4
Unit:mm
MODEL NO.DIMENTION PITCH
G
POLE
P
NO. OF
POLE
TOTAL HOLDING
POWER kgf ±5%
CHUCK
N.W.
VOLTAGE
(Single Phase)
CURRENT
AMP
CONTROLLER
(included)
VOLTAGE
(Single Phase)
CURRENT
AMP
CONTROLLER
(included)
S1 
EEPM-6060B  600 590 30 25 30 M8  60 10 50×50 72 22500 165kg  CHUCK
DC
220V

CONTROLLER
AC
220V
/
480V
18A  C4  CHUCK
DC
380V

CONTROLLER
AC
380V
/
440V
18A  C2
EEPM-6080B  600 810 30 25 30 99 30900 215kg  30A  C4  19A  C4
EEPM-6090B  600 870 30 25 30 108 33700 240kg  27A  C4  20A  C4
EEPM-60100B  600 990 30 25 30 126 39300 274kg  32A  C4  21A  C4
EEPM-8080B  755 810 30 25 30 121 37800 271kg  33A  C4  18A  C4

Option Accessories-Induction Block EEPM-IB Series
  • Specification
    Unit:mm
    MODEL NO. NO. OF
    POLE 
    HEIGHT G
    EEPM-IB225B   50 110 25 50 10
    EEPM-IB325B   50 170 25 50 10

    MODEL NO. NO. OF
    POLE 
    HEIGHT G
    EEPM-IB250B   50 110 50 50 10
    EEPM-IB350B   50 170 50 50 10
  • Features:
    • Induction Block EEPM-IB series are use with EEPM chucks, can be increased to more functions on workholding.
    • Increased using life of magnetic chuck: We suggest always use induction block to clamp workpieces, due to workpiece will not touch to the surface of chucks it can be keep chucks always be new.
    • Convenience and Accuracy: Induction Block are interchanging & consuming accessories, you can machining surface or forming induction blocks for the workpiece required by the machine directly, so the parallelism of induction block will always 100% match to the machine.
  • Working Example
  • Video
  • Other Accessories
    • proimages/products/PRODUCT-15/006.png
Products