1. Home
  2. Products
  3. Drill Grinder / End Mill Re-Sharpener
  4. ECO-316

ECO-316

End Mill & Drill Cutter
https://www.earth-chain.com/web/image/product.template/118/image_1920?unique=2408946

Easy to operate, no experience required for grind a precise drill.


    This combination does not exist.


    Ø3mm-Ø16mm

              For SDC Wheel 


    Carbide END Mill 

              For CBN Wheel 


    SG High Speed Drill



    Titanium Coated Drill



    Straight Shank Drill 



    HSS END Mill 


    Specification Operations

    Specification 

    SDC & CBN Wheel


    ECO-316-1C

    ECO-316-1D


    Model NO. ECO-316 Motor 600W
    Capacity Ø3mm ~ Ø16mm R.P.M. 6000 R.P.M.
    Power Supply AC110V - AC220V
    Single Phase (60Hz/50Hz)    		 Weight 13 kg
    Grinding Wheel SDC#100

    Standard Accessories
    SDC Wheel #100 x 1pc 、 Handle x 1pc
    Hexagon Wrench 4mm x 1pc 10mm x 1pc、Power Cord x 1pc、Fuse x 2pcs

    Option Accessories
    Order No.Description
    ECO-316-1C CBN Wheel #100 ( For HSS drill ) Ø3mm ~ Ø16mm
    ECO-316-1D SDC Wheel #100 ( For Carbide drill ) Ø3mm ~ Ø16mm

    Operations

    • Install the power cord on the cutter.

    • Put the machine on a hard, level surface, then install the handle on the base.

             ***as shown on diagram #1

     

    • Lock the valve connector, then insert the pressurized blast connector into the air pressurized cooling system.

      • ***as shown on diagram #2

    • Select the proper wheel and diameter of end mill drill Ø3mm~Ø16mm, put the end mill (drill) horizontally into the groove from right to left. Adjust the proper length for cut and tighten the base with Ø10mm Allen Key.

            Note: Make sure the end mill (drill) is locatched in V-groove.
         ***as shown on diagram #3


           

    • Switch on the machine.

    • Switch on the cooling system

             Note: The usage life will be decreased if don't switch on the cooling system.

             ***as shown on diagram #4 

             Hold and raise the handle to cut off the end mill (drill).

             ***as shown on diagram #5

    • Touch the wheel with a slight push motion.

    • Be sure with very slight push motion during cutting process, don't be fast or slow at will.

    • To avoid the material fly away, be sure with very slight push motion while the end mill (drill) is going to be cut off.        

             

    • Switch off the machine.

    • Switch off the cooling system.

    • Loosen the base with 10mm Allen Key, then take out the end mill (drill)

            ***as shown on diagram #6

    Be sure to do every cleaning and maintenance well to maintain the usage life.

    Note: Please switch off the machine while replacing the wheel to ensure the security!