Electro-Permanent Magnetic Chuck EEPM-A Series
Pole 35X35 mm, Flux Line 15 mm, Magnetic Force 580±5% kgf/4 Poles
Applications
- Suitable for thin, small and medium workpiece on light duty machining.
- Suitable for thin, small and medium workpiece of the drilling and finishing machining.
- Minimum size of workpiece required as 4 alternate magnetic square poles and above contacts is necessary for optimum clamping.
- More functions for cooperate with Induction Block and Spring Block. (See the detail of Option Accessories)
Unit:mm
Customization is available.
| MODEL NO. | DIMENSION | PITCH G | POLE P | NO. OF POLE | Unipolar suction kgf ±5% | TOTAL HOLDING POWER kgf ±5% | CHUCK N.W. | VOLTAGE (Single Phase) | CURRENT AMP | CONTROLLER (included) | ||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| W | L | S | S1 | M | T | H | ||||||||||
| EEPM-1530A | 185 | 320 | 30.5 | 26 | - | M6 | 50 | 7 | 35×35 | 18 | 145 | 2610 | 23kg | CHUCK DC 220V CONTROLLER AC 220V / 480V |
18A | C1 |
| EEPM-2540A | 225 | 440 | 30 | 25 | 30 | 32 | 4640 | 39kg | 30A | C1 | ||||||
| EEPM-2560A | 225 | 610 | 31 | 25 | 30 | 48 | 6960 | 54kg | 26A | C2 | ||||||
| EEPM-3030A | 310 | 320 | 30.5 | 25.5 | - | 36 | 5220 | 39kg | 26A | C1 | ||||||
| EEPM-3040A | 310 | 440 | 30 | 25.5 | 30 | 48 | 6960 | 53kg | 25A | C2 | ||||||
| EEPM-3060A | 310 | 610 | 31 | 25.5 | 30 | 72 | 10440 | 74kg | 31A | C2 | ||||||
| EEPM-4040A | 435 | 440 | 30 | 25 | 30 | 72 | 10440 | 75kg | 31A | C2 | ||||||
| EEPM-4050A | 435 | 525 | 30.5 | 25 | 30 | 90 | 13050 | 90kg | 24A | C4 | ||||||
| EEPM-4060A | 435 | 610 | 31 | 25 | 30 | 108 | 15660 | 104kg | 26A | C4 | ||||||
Option Accessories-Induction Block EEPM-IBA Series
- Specification
Unit:mmMODEL NO. NO. OF
POLEW L HEIGHT P G EEPM-IB215A 2 35 77 15 35 7 EEPM-IB315A 3 35 119 15 35 7 - Features:
- Induction Block EEPM-IB series are use with EEPM chucks, can be increased to more functions on workholding.
- Increased using life of magnetic chuck: We suggest always use induction block to clamp workpieces, due to workpiece will not touch to the surface of chucks it can be keep chucks always be new.
- Convenience and Accuracy: Induction Block are interchanging & consuming accessories, you can machining surface or forming induction blocks for the workpiece required by the machine directly, so the parallelism of induction block will always 100% match to the machine.
- Working Example
- Video
- Other Accessories
