Lifting MagnetELM Series
Product Description
Suitable for move plate steel, block steel and round steel, such as machine parts, press molds, plastic molds and iron material .....etc.
詢價、詢問
proimages/products/product-11/ELM_Series/38.jpg
    • Made by "Rare Earth" magnet with technology of improvement.
    • All new models with "light weight" "less dimension" and "lower price".
    • Made by permanent magnet, require no power supply, thus eliminating hazards due to failure wiring system as electric type.
    • It features powerful magnetic force, with 3.5 times safety coefficient makes more safety in use.


    Applications

    Suitable for move plate steel, block steel and round steel, such as machine parts, press molds, plastic molds and iron material .....etc.

  • SAFETY FACTOR x 3.5TIMES (ELM-3000 × 3.0 times)

    The capacity of magnet indicated as 1/3.5 of holding power, it means the real holding power is 3.5 times of capacity. For example the capacity of ELM-600 is 600kg (1320lbs) but the real holding power is 2100kg (4620lbs).

    The large safety coefficient is concideration for ensuring the use in safety.

    MAXIMUM LIFTING RANGE

    Form of materialSteel plate     Round steel&nbsp    ; 
    MODEL  Max. lifting capacity Min. thickness required Max. lifting capacity Max. diameter Maximum length 
    kgf lbs mm inch kgf lbs mm inch mm inch 
    ELM-100  100  220  15 0.59" 60 132 150 5.9" 500 20"
    ELM-300  300  660  25 0.98" 180 400 250 9.8" 800 32"
    ELM-600  600  1320  30 1.18" 360 800 350 13.8" 1200 48"
    ELM-1000  1000  2200  40 1.57" 600 1320 450 17.8" 1500 60"
    ELM-2000  2000  4400  55 2.16" 1200 2640 550 21.6" 1800 70"
    ELM-3000  3000  6600  60 2.36" 1800 3960 650 25.6" 2300 90"

    The above diagrams is only for reference. The operator should be test and chech if it is in safe range before lift away the workpiece of steel. Other wise, it will be not responsibility by producer for any accidents.

  • MODELCapacityABCDEFGHWeightSAFETY
    FACTOR
    kgflbfmminchmminchmminchmminchmminchmminchmminchmminchkglbs
    ELM-100 100 220 107 4.2 84 3.3 129 5.0 123 4.8 60 2.4 71 2.8 46 1.8 30 1.2 2.5 5.5 x3.5 times
    ELM-300 300 660 180 7.1 155 6.1 157 6.2 185 7.3 90 3.5 93 3.7 51 2.0 41 1.6 8.6 18.9
    ELM-600 600 1320 255 10 224 8.8 213 8.4 263 10.4 115 4.5 120 4.7 77 3.0 52 2.0 21 46
    ELM-1000 1000 2200 294 11.5 259 10.1 286 11.3 377 14.8 163 6.4 169 6.7 97 3.8 87 3.4 46 101
    ELM-2000 2000 4400 422 16.6 360 15 355 14.0 515 20.3 216 8.5 215 8.5 105 4.1 123 4.8 118 260
    ELM-3000 3000 6600 587 23.1 521 20.5 423 16.7 710 28 216 8.5 222 8.7 158 6.2 80 3.2 181 398 x3.0 times
  • The load of holding power will changes depending on the thickness, attractive face roughness and quality of material and clearance between the workpiece with magnet.(See as the graphs as below)


    Chart of difference in holding power by thickness

    Thickness Percentage of lifting capacity 
    mm inch ELM-3000 ELM-2000 ELM-1000 ELM-600 ELM-300 ELM-100 
    T1  up 60  up 2.36”  100% 100% 100% 100% 100% 100%
    T2  55  2.36”  95%
    T3  50  1.97”  90% 95%
    T4  45  1.77”  85% 90%
    T5  40  1.57”  80% 85%
    T6  35  1.38”  70% 75% 90%
    T7  30  1.18”  60% 65% 80%
    T8  25  0.98”  50% 55% 70% 90%
    T9  20  0.79”  40% 45% 60% 75% 90%
    T10  15  0.59”  30% 35% 50% 60% 70%
    T11  10  0.39”  20% 25% 35% 45% 50% 70%
    T12  0.20”  10% 15% 20% 25% 30% 40%


    Chart of difference in holding power by attractive face      Chart of difference in holding power by material quality
    roughness For all models
                        For all models

    proimages/products/product-11/ELM_Series/02.jpg

    Calculating Formula for“Range of Lifting Capacity”→ (TxFxMxCapacity of Lifter)

    Example: Terms of workpiece: T8, F1 and M290% x 125% x 85% x 600kgf (ELM-600)=573kgf


Operations

With ON/OFF switch, it is very easy and convenient to operate. See as the example pictures as below


Notice:

Never moves the handle to "ON" side, except on an iron object of holding.

Products