BAT TYPE DEMAGNETIZEREHDB-210
Product Introduction




  • * Suitable for demagnetizing stamping metalwork, ejection mold, etc.
  • * Portable type for demagnetizing a narrow part of large steel plate.
  • * Turn it OFF when the demagnetizer is more than 100mm away from the demagnetizing workpiece.
  • * Working rate: 20%ED (operating for 1 minute and pausing for 4 minutes).
  • * Can demagnetize the mold on machine directly to reduce damages by chips while stamping metalwork continuously.
詢價、詢問
ModelInput Voltage Current Duty Cycle Dimension Net Weight 
EHDB-210  AC 110/220V
(Single Phase) 
1.1A/0.5A   20%
After operation by 1 mins,it must be turned off for 4 mins.
346 mm 36 mm 34 mm  1.1 kg 
Products